Carbon Rod

中冶产品_0000_Qingdao-Zhongye-High-Temperature-Materials-Co-Ltd- (2)(1)

中冶产品_0001_Qingdao-Zhongye-High-Temperature-Materials-Co-Ltd-(1)

Carbon Rod

Product Description

1. High temperature resistance, acid and alkali resistance, and oxidation resistance;

2. Stable quality and excellent cold and hot strength, meeting the requirements for handling, installation, and use; Offers various rod head designs, from hemispherical and multi-curvature to conical, for effective and accurate control of high-temperature molten metal flow;

3. High-quality anti-oxidation coating, ensuring the carbon rod does not oxidize at 550-1500°C, thus guaranteeing a long service life;

4. Customized carbon rods can be provided to meet specific customer requirements.

(0) Reviews

Inquiry NowInquiry Now

Share To:

Basic Info
FAQ
Inquire Now
Related Products
Customer Reviews

Basic Info

ltem		Specification
Chemical Composition(%	Al203	≥45
	C	≥27
Bulk Density(g/cm2)		≥2.5
Apparent Porosity(%)		≤18
Cold Crushing Strength(MPa)		≥25
Modulus of Rupture-Room Temp(MPa)		≥6

FAQ

Q: Slow Heat Conduction

A: 1. Not preheating according to the standard procedure.
2. Slag influences heat conduction.
3. The crucible has reached its service life.
Q: Crucibe corrosion

A: 1. Adding flux before metal is molten or excessive use of flux.
2. Certain fluxes contain corrosion substances.
3. Fuel containing corrosive substance.
4. Abnormal high-temperature operation may result in glaze layer smelting resembling corrosion.
Q: Top problems

A: 1. Repeatedly top impacted on top area cause oxidation.
2.Slags accumulated arround the top area or between the top area and the furnace cover.
3.Small gape between the top and the furnace cover. 4. Low temperature on top area.
5. Contacting with some matels with lager heat exchanging coefficients.
6. Excentral installation cause not enough space between the top and furnace.
Q: Excessive oxidation

A: 1. Flame in furnace against the bottom of the crucible directly.
2. Low temperature in the top area. 3.Overheated working temperature.
4. Hoisting or moving improperly damages glaze layer.
5. The emergent drain hole is open.
Q: Explosion

A: 1.Heating rapidly while the crucible has damped during transportation or storage.
2. Over rapid heating-up during preheating procedure.
3. The added materials are not completely dried.
Q: Middle or bottom craks

A: 1.Impacted during transportation or installation.
2. Crucible should be placed in the middle of the furnace stack smoothly and stably.
3. An improper graphite stand is used.
4. The existence of great thermal difference in the furnace.
5.Matel ingots in the crucible filled horizontally or diagonally.Metal materials overfilled.
6. Leftover slag or molten matal in the crucible.

Inquire Now

Name*
E-mail*
Phone
Country
Message
Verification Code:*